In the spirit of Halloween and everything spooky and fun, I came up with this eye popping design. XD Apparently I like puns.
♫♪ Jeepers creepers! Where’d you get those peepers? Jeepers creepers where’d you get those eyes?♪♫ Maybe I’m just old, but does anyone else remember that song? I heard it in an old black and white cartoon. And I don’t think it was Casper either…. Or was it?
Also if anyone is wondering about the cookie- it’s my famous “Less Chocolate Chips, Chocolate Chip Cookies”. I make them this way because as much as I like chocolate chip cookies- I really don’t like to bite into my cookie and see a center filled with chocolate. I’m weird, I know.
So anyways onto instructions for this design. Which happens to be my first video tutorial!!!!!! XD
Just to add into the video a little bit- for the pupil you could make a slit pupil like a cat or snake! 😀
List of Items Used:
- White Nail Polish: OPI “Alpine Snow”
- Wet n’ Wild Fantasy Makers Glow-in-the-dark polish
- Seche Vite Fast Dry Top Coat
- Acrylic Paints:
- Black: Folk Art “Pure Black”
- Navy: Folk Art “Navy”
- Light Blue: Jo Ann’s Craft Essentials “Baby Blue”
Yummm! Who could resist? All these need now is a basket! XD
Base Coat all nails! I used OPI Nail Envy.
Apple! I put down a green base color for my background and used my largest dotting tool to make the sparkly red apple. It would probably look even nicer to outline you apple in black. I used my smallest dotting tool to make a “shiny” spot on the apple and the stem.
Grapes! My base color use was white, I used one of my larger dotting tools (not the largest)to sporadically place the grapes in somewhat of a cluster. Don’t have them too close or it will end up looking like a blob. I used my detail brush to add the curly stem and leaf.
Strawberry! Base color red. Use a darker green to make a saw toothed edge tip. To do this gently place the nail polish brush at an angle on the nail where you want the tip of the leaf to be and drag it downward off of the nail. Repeat until finish. Try not to place the brush to close to the previous leaf tip because they will just look like you did a sloppy french tip. It’s better to go a little bit farther away then you think it should just in case and then you can build it up if it needs it. For the seeds I used a yellow stripper polish and dabbed on the seeds. I used yellow because I thought it looked more like real seeds.
Watermelon!Creamy pink base color! Then start at the bottom with a dark green stripper and make a thing line int the tip of the nail. Make another line next to that one in a white. This next line is optional- pink! I did it this way because I think it looks nicer. If you don’t like it you can skip it. Now for the seeds you can use a dotting tool, I just used the black stripper brush and dabbed them on in somewhat of a row like you would see in a real slice of watermelon.
Kiwi! Base color is a shimmery lime green. make the center of the fruit “slice” by using a light green a making lines, very close together, into and oval shape. These lines don’t need to be uniform- just as long as they take the oval shape, leaving the center open. Make some seeds, same as before, using the stripper brush and dab them around the edges of the oval.
Sorry there is no “Polishes Used” List this time! I did this awhile ago. My collection has grown since I’ve done this design and I’m not sure which colors where used for some of the nails. I will try to make this list later. I hope you enjoy this in the mean time while I try to get some new designs together for next week. 😀
Quick Question! Does anyone play OMGPop?
For any of the designs you could either do all fingers with the one ball of your choice ( or multiple balls ) or a fun alternative could be paint your thumb and ring finger in the ball of your choice and doing all others with a complimenting french tip.
For example if you like basketball, do the thumb and ring finger as the ball and all other with an orange tip maybe even go over the “smile” line with a black stripper to outline.
Another idea would be to do all the other tips with your favorite sports team’s colors!
Okay now for the breakdown of these designs. Basecoat all nails!
The baseball can be done two ways. After putting down your white polish you can either take a detail brush and go in a zig-zag like motion to make it appear threaded or just do the two lines curving in and then out again with a red stripper. If you attempt the zig-zag motion and you’re not used to doing detailed work, practice on paper until you’ve got a nice flow going. Also, if you don’t have a detail brush just try a toothpick. Finish with a top coat.
The tennis ball was very fun to make. I used a cosmetic sponge to sponge on the electric green. After that layer dries but still a little tacky I used the sponge again to sponge on a light layer of a very electric yellow (reminds me of a highlighter). I chose to sponge it so that it gives it more of a texturized look and feel. After those dry use a white stripper to make your tennis ball seams. The same as the baseball, it’s just two lines curving in-out-in. These are very easy, just go slower if you’re not too confident in your abilities. I didn’t finish with a top coat so that it has a fuzzy tennis ball like look.
For the basketball use a bold dusky orange. You may need 2-3 coats depending on the opaqueness of your polish. You could also do your second coat texturized like the tennis ball with a cosmetic sponge. I haven’t tried this method for the basketball, but it might look good. After you coats are dry add the curving in-out-in lines and then 2 intersecting lines to finish the look. Finish with a top coat.
So for the football paint you nail all brown 2-3 coats. After it dries use a white stripper to make one line down the middle and then some intersecting lines for the threads. Finish with a top coat.
As for top coats instead of a glossy one, you could also use a matte top coat to make them seem a little realistic. If you do use a matte top coat for the tennis ball I suggest doing this before the white lines, but it’s not a rule and it’s up to you. I suggest this so that the line are glossy over top the “fuzzy” ball.
- Baseball White: OPI “Alpine Snow”
- Red “Threads”: OPI “Color So Hot It Berns”
- Basketball Orange: OPI “Chop-Sticking To My Story”
- Black Stripper: L.A. Colors Art Deco “Black”
- Football Brown: Revlon “Hot For Chocolate”
- Tennis Ball Green: Sinful Colors “Irish Green”
- Tennis Ball Yellow: Sinful Color “Neon Melon”
- White Stripper: L.A. Colors Art Deco “White”
So as always you do not need the exact same brands that I use.
Since I did these designs on my nail wheel, I didn’t use a base or top coat. Normally if I was sporting this (XD) on my own nail I would use OPI Nail Envy for my base coat and either my Seche Vite Fast Drying Top Coat or my matte top coat Hard Candy “Matte-ly In Love”.
So I hoped you like these and leave a comment telling me what one you liked or your favorite sport/team. 😀
Itty Bitty Paw Prints
This is my own design, using my own polish that I bought with my own money. 🙂
This design was requested by another friend of mine. 😉
I know that “IHaveACupcake” on youtube has a similar design that’s just as fun and easy. Check her out!
This design is super easy to do! All you need is a few of your favorite colors and a dotting tool (which you can make yourself!).
Put down a base coat and your favorite color (I used a magenta type of polish).
Put a few drops of your contrasting polish on a piece of paper or on a plate or an old lid of something- you get the idea- something you don’t mind ruining. You’re going to be dipping your dotting tool in this for creating the paw prints. I used a pearly white on my left and black on my right for the paw prints.
Putting on the paw prints are really easy. Now personally I like paw prints that look a little more realistic so I put three dots close together in a triangular shape using my largest dotting tool. If you feel like that’s too much work you can just do one larger DOT for the center pad of the “paw”.
Then after that use a smaller dotting tool and make the “toes”. As you can see from the picture I made the two in the center kind of close together and then the last two on the sides. Be careful to not go to far down the sides or away from the middle because then it will start to look like you just put a bunch of random dots on…. but that could still be cool! 😀
You can put as many paw prints as you want or very few if you prefer. For example my little finger doesn’t have as much space as my other fingers so I did just one paw print on it. Kind of reminds me of my old high school team logo, not the same colors though 😦
What I used:
- Base Coat: OPI Naile Envy
- Magenta: China Glaze “108 Degrees”
- Pearly White: Sinful Colors “Tokyo Pearl”
- Black: Sally Hansen “Black Out”
- Top Coat: Seche Vite
I’m hoping that soon I will start making some videos to make it easier to understand what I’m talking about most of the time. I’m sure a lot of people are a lot like myself when it come to learning new things- you have to see it! Also I’ll be posting picture’s of my tool supplies and a link to a youtuber that has a tutorial on how to make your own dotting tools. I’m also hoping to start adding to the tips and tricks section pretty soon! So please feel free to contact me with any suggestions or requests! Good luck and have fun!
This design was one made by Dollface22772 on Youtube Titled “Cherries Jubilee”.
This is my own variation of it. I didn’t have any of the cherry fimo slices so I had painted the cherries using a dotting tool. Also instead of using a pink crackle polish, I painted over the white edge on one corner with a red polish. Then covered it with a white crackle polish.
Polishes I Used:
- Base Coat: OPI Nail Envy
- Top Coat: Seche Vite
- White: Salley Hansen Xtreme Wear “White On”
- White Crackle: Chine Glaze Crackle Glaze “Lightning Bolt”
- White Stripe: Sinful Colors “Bad Chick”
- Red Stripe: Sinful Colors “Be my Valentine”
- Green Stems: L.A. Colors Art Deco “Bright Green”